Peterburgsky Traktorny Zavod

KIROVETS™. Exceptional effectiveness
     

Dump truck

COMING SOON! Kirovets K-708.2

Articulated dump truck.
Construction weight 14,8t., load capacity 25 tons., gross weight 39.8 tons.

Overview

Petersburg Tractor Plant designs and manufactures articulated equipment for agriculture and industry of our country for more than 50 years. In connection with mining industry development and construction of a number of large infrastructure objects there is demand for articulating dump trucks in last decade which have  a number of advantages over quarry rigid-framed and road dump trucks.
Therefore, a logical extension of our competence was the creation of the articulated dump truck that embodies all of our and global developments.
Thanks to the reliable transmission, the powerful flexible joint and frame the dump truck Kirovets K-708.2 received unbeaten agility, cross-country ability and reliability. Taking into consideration  the competitive purchase price, you will receive during operation:
 
  • highest cross-country ability, seasonality and all-weather capability (the work does not stop no matter are the road conditions , soil type, relief and weather)
  • substantial cost savings on operations for the preparation of technological roads,
  • low costs for maintenance and petroleum products for dump truck,
  • high performance and low cost of operation and transportation of ton of cargo
  • And more important is that  "you will be able to complete the project on schedule, and not to disappoint the customer."
 

These features are the main advantages of Kirovets dump trucks over the traditional dump trucks.

Use

Main use of articulated dump truck:

• construction of canals, roads and railways, airports and other facilities
• sand, gravel and stone quarries, mining of limestone and shale, overburden operations, open cast mining
• transportation of garbage
• transportation of timber, coal, pipes
 

The main units

Engine

Model Cummins 6LTAA8,9-C300

Diesel four-cycle, with direct injection, turbocharged with gas-turbine supercharge and supercharged air cooling, with the arrangement of the cylinders in a row

Rated power, kW (hp) - 225 (300)
Number of cylinders - 6
 
The working volume of the cylinder, L - 8.9
Specific fuel consumption at rated power, g / kW*h - 210
Air cleaner, dry, single-step
The exhaust system - direct-flow muffler made with resonant chamber with possibility to transfer the exhaust to heating. There is a lid at the exit of the muffler which provides muffler from being hit by water.
 

 

Cooling system - closed, with forced circulation of coolant
Starting system - electric
Electric equipment system voltage, V - 24
 

Transmission

Model - ZF 6WG 190
Number of gears:
-forward running - 6
- reverse running - 3
 

Suspension

Rigid unsprung. The front axle is attached to the rest sites of half-frame with bolts, check washers and nuts.
The rear axle is attached to longeron of loading half-frame with bolts, check washers and nuts.
 

Steering

Steering column. The upper part of the column is movable, which allows adjusting the angle of the steering wheel to the horizon

The steering column has stepless adjustment of tilt positions: from the horizontal position of the steering wheel up to 22 ° to the horizon; vertical position is used to provide a convenient exit from the driver's cab

Brakes

Main brakes – dry, pneumatic, shoe-typed
Parking brake - disk, dry friction, installed on the axle, hydraulic control
 

Hydraulics

Joint for hydraulic control of the tractor turning and body lifting
 

Driving axles

 

Driving axles with increased joint carrier / hub, with self-locking differential No Spin.
The total reduction rate- 17.853
 

Body

Bucket-type, welded construction heated by engine exhaust engine (optional),  with fettling from a sheet of plastic OKULEN (optional).
Body capacity, m * cc
- Geometric - 12.0
- Rated (with a cap) - 14

Cardan gear

Cardan gear of tractor consists of a front driveshaft of transmission drive, driveshaft of the front axle and the rear axle driveshaft shaft with intermediate bearing.
 

Cabin

Tilting system cabin with integrated protective frame made of rectangular-cut tubes, all-metal, double, sealed, heated and ventilated, with a heat-absorbing tinted glasses.

Frame

Articulated-type frame with two degrees of freedom. It consists of two half-frames - the motor, the cargo and the joint pipes, structurally designed as a cross with two degrees of freedom.

Both frames are welded from high-strength low-alloy steel, composed of longerons, interconnected by cross members. The front and rear frames have fixing lugs for towing devices.

Weight

Constructional kg - 14800
Useful load (weight-carrying ability), kg - 25000
Gross (with cargo), kg - 39800

refill capacity 

Fuel tanks, l - 2x320
Engine lubricating system, l - 18
Cooling system, l - 42
 

Parameters

Index

Engine

Cummins 6LTAA8,9

300 h.p.

Cooling system

Closed, split, with forced recirculation of the coolant. Starting preheater

 

Webasto Termo 90ST 9.1 kW.

Transmission,

max speed (empty / with cargo, km / h)

ZF-6WG 190;

without cargo - 49 / with cargo - 40 km / h

Axles

Own production

744BYA-23 00 000 и 744BYA-23 00 000-1

Suspension

Rigid, unsprung.

Frame

Articulated-type frame of the tractor, with two degrees of freedom. It consists of two half-frames - under motor, cargo and joint pipe.

The pneumatic system of brake actuator

Dual circuit, consists of: compressor, moisture and oil separator with pressure regulator, the brake master crane, receiver, double protection valve and floating cramp.

Hydraulic system of tractor turning and body lifting control

Combined Hydraulic system of tractor turning and body lifting control with a single hydraulic reservoir. Drive: gear pump GP80G-25M Hydrosila.

 Electrical equipment

Rated voltage 24V. Generator: power 2,1 kW, the maximum load current 75A, regulator supported voltage 28,3 ± 0.3V. Batteries: 6ST-190AP3 in the amount of 2 pieces, the nominal capacity of each 190A * h, rated voltage of each 12,6V.

 Cabin

With built-in protective cage (ROPS), full metal, two-seat, steering column and driver's seat are on the right in the direction of motion. Heating, ventilation, inner lining with thermal and noise insulation material.

 The body heated by exhaust.

 

 

Load capacity, t ……………..   25

Geometric volume, m * cubic ….   12

Volume with cap, m * cubic ………….   14

Loading height, mm.  …………..   2900

Width, mm ………………………  2950

Body lifting angle, degree ………   70

Time of body lifting, s …….   15

Time of body lowering, s, …..   12

 Wheels

Tires 26.5-25 PR28 E-3 \ L-3 TT, rim 24,00-25 / 2.5

 Refill capacity

Fuel tank - 680 liters (2 pieces each 340 liters) with Separ-2000 filter.

Oil tank for hydraulic system turning and body lifting control of 120 liters

Execution for operating conditions at temperatures up to

±40°С.

Completeness

Preparation of the connector for the installation of NASTKOM equipment

Orange rotating beacon, pcs

1

Parameters Index
Engine Cummins 6LTAA8,9
 
300 h.p.
Cooling system Closed, split, with forced recirculation of the coolant. Starting preheater
 
 
Webasto Termo 90ST 9.1 kW.
Transmission, ZF-6WG 190;
   
max speed (empty / with cargo, km / h) without cargo - 49 / with cargo - 40 km / h
Axles Own production
 
744BYA-23 00 000 и 744BYA-23 00 000-1
Suspension Rigid, unsprung.
Frame Articulated-type frame of the tractor, with two degrees of freedom. It consists of two half-frames - under motor, cargo and joint pipe.
The pneumatic system of brake actuator Dual circuit, consists of: compressor, moisture and oil separator with pressure regulator, the brake master crane, receiver, double protection valve and floating cramp
Hydraulic system of tractor turning and body lifting control Combined Hydraulic system of tractor turning and body lifting control with a single hydraulic reservoir. Drive: gear pump GP80G-25M Hydrosila.
 Electrical equipment Rated voltage 24V. Generator: power 2,1 kW, the maximum load current 75A, regulator supported voltage 28,3 ± 0.3V. Batteries: 6ST-190AP3 in the amount of 2 pieces, the nominal capacity of each 190A * h, rated voltage of each 12,6V.
 Cabin Cabin with integrated protective frame made of rectangular-cut tubes, all-metal, double, sealed, heated and ventilated, with a heat-absorbing tinted glasses, Eberspaher Airtronic D4 24V - stand-alone cab heater (4 kW)
 The body heated by exhaust. Load capacity, t ……………..   25
 
Geometric volume, m * cubic ….   12
 
Volume with cap, m * cubic ………….   14
 
Loading height, mm  …………..   2900
 
Width, mm ………………………  2950
 
Body lifting angle, degree ………   70
 
Body lifting angle, degree …….   15
 
Time of body lowering, s, …..   12
 Wheels Tires 26,5-25 PR28 E-3\L-3 TT, rim 24,00-25/2,5
 Refill capacity Fuel tank - 680 liters (2 pieces each 340 liters) with Separ-2000 filter.
 
Oil tank for hydraulic system turning and body lifting control of 120 liters
Execution for operating conditions at temperatures up to ±40°С.
Completeness Preparation of the connector for the installation of NASTKOM equipment
Orange rotating beacon, pcs 1